Submersible pond pump is ideal for your small to medium sized ponds. It can be submerged in water to make fountain or waterfall in your ponds. It only needs low maintenance because the design is so simple, and it has also minimal parts. These factors also make installation easy.
To maintain submersible pond pump, switch off the pump before unplugging it from the power socket in order to guard against electrocution when you are cleaning the pump. To pull the pump out of the water, use the string tied around the handle of the pump. The most common mistake is the extremely dangerous one: yanking the submersible pond pump out of the water by pulling the wires connected to it.
After pulling the submersible pond pump out of water, dismantle the parts and set them aside. Clean the parts with fresh water carefully. Do not ever use detergents! Detergents can pollute your pond if you do not wash them properly, so they can harm the fish. Check out the filters. If you find any blockages or damage in the parts, clean and fix them.
After cleaning your submersible pond pump, make sure that all electrical cables are well-connected to the pump and have no sign of damage. It will be dangerous if one cable is installed carelessly. The electricity can kill your fish.
The next thing you should do is checking out the hose/ if there are any blockages, clear them. Make certain that the switch to witch the submersible pond pump will be connected is working fine. Finally, check out all the cables and wiring, and reassemble the dismantled pump and place it inside the water.
Alita Submersible Pond Pump
This submersible pond pump is constructed with stainless steel and engineering composites with glass fiber reinforcement. It is light-weighted and corrosion resistant. It is also completed with non-clog vortex impeller for free passage of large solids and fibers. The motor housing is stainless steel.
Every model of Alita submersible pond pump is capable of operation under corrosive and abrasive conditions. The non-clog performing volute impeller made of fiberglass reinforced plastic provides continuous operation with minimum abrasive wear and eliminates clogging and binding. This submersible pond pump is available in three types. The pump power varies from 4200, 5500, and 6300 gallons per hour. You can choose the power based on your needs. No matter which one you choose, it will be durable and it will last for years!
EasyPro Sub Pumps
It is popular for use in fountains, waterfalls, and decorative fish ponds. It is energy efficient, long lasting stainless steel pumps. Its rugged motor is designed for long life and continuous duty operation. Its motor housing is corrosion-resistant stainless steel. This submersible pond pumps needs low maintenance since the pump casing is made from abrasion resistant, fiber reinforced plastic for maximum life. The vortex design prevents clogging. You will get 2 year warranty by buying this pump.